Table of Contents
Advertisement
Parameter
Subnet Prefix
Default Gateway
TCP Port
HTTP Port
RTSP port
UDP Port
Max Connection
Note: system will need to check the validity of all IPv6 addresses. The IP address and the default
gateway shall be in the same IP section. That is to say, the specified length of the subnet prefix
shall have the same string.
For the IPv6 version, IP version, default gateway, preferred DNS and alternate DNS, the input
value shall be 128-digit. It cannot be left in blank.
Advanced setup
The remote host can choose multi-cast and PPOE to set. See Figure 6-29.
© Copyright Qvis ®. All documentation rights reserved.
Function
The input value ranges from 0 to 128. It is to mark a
specified network MAC address. Usually it includes an
organisation of the multiple-levels.
Here you can input the default gateway.
Default value is 37777. You can change if necessary.
Default value is 80.
Default value is 554.
Default value is 37778. You can change if necessary.
Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
Figure 6-29 Network
\
103
Advertisement
Table of Contents
