Qvis Iapollo SMART NVR User Manual page 108

Please refer to the following sheet for detailed information.
Parameter Function
Please select a channel first.
Channel
Pre-record Please input pre-record value here.
When alarm record or motion detection record occurs, system can
record the several seconds of video before activating the record
operation into the file. (Depends on data size).
Setup
© Copyright Qvis ®. All documentation rights reserved.
Figure 6-26 Copy
Figure 6-27

In Figure 6-24, click the set button; you can go to the
corresponding setup interface (see Figure 6-25).

Please set the schedule period and then select the
corresponding record type: schedule, motion detection, and
alarm.

Please select the date (Current setup applies to current day
by default. You can draw a circle before the week to apply the
setup to the whole week.)

After complete setup, please go back to Figure 6-24 and then
click save to save current time period setup.
101