Table of Contents
Advertisement
Figure 6-65
Now you can see system begins the download and the download button becomes the stop button.
You can click it to terminate current operation.
At the bottom of the interface, there is a process bar for your reference.
6.6 Alarm
Click alarm function, you can see an interface shown in Figure 6-66. Here you can set device
alarm type and alarm sound setup.
When an alarm occurs, the system can display the alarm information in the corresponding
interface.
For motion detect, video loss and camera masking you need to set the event in the motion
detection interface. Current series product does not support this function.
© Copyright Qvis ®. All documentation rights reserved.
133
Advertisement
Table of Contents
