Table of Contents
Advertisement
You can overlay the corresponding date, time and channel name on each screen. You can refer to
the following sheet for channel record or alarm status information.
1
Recording status
2
Motion detection
Preview Control
The preview control function has the following features.
Support preview playback.
In the preview desktop, system can playback previous 5-60 minutes record of current
channel. Please go to the Main Menu->General to set real-time playback time.
Supports drag and play function. You can use your mouse to select any playback
start time.
Supports playback, pause and exit function.
At this point, the system does not support slow playback and backward playback
function.
Support digital zoom function.
Support real-time backup function.
You can follow the contents listed below for the operation instruction.
Preview control interface
Move your mouse to the top centre of the current video channel; you can see that the system
pops up the 'Preview control interface'. See Figure 4-3. If your mouse stays in this area for
more than 6 seconds and has no operation, the control bar automatically hides.
1
© Copyright Qvis ®. All documentation rights reserved.
3
4
3
4
2
5
Figure 4-3
Video loss
Camera lock
6
7
9
Advertisement
Table of Contents
