Table of Contents
Advertisement
Important: Once you change the HDD Group settings, system will pack the recorded video files &
snapshots, and then reboot.
Channels Setting
Click the button named 'Channels Settings' at the top right corner of the Figure 4-77, the system
will pop up an interface as shown in Figure 4-80.
You can set the HDDs to main stream, extra stream or snap pictures respectively. The main
stream and extra stream of one channel can be saved to different groups.
Channel: It is to display the actual channel number of current NVR.
HDD Group: This is the SN of the HDD group management. For example, if you set two HDD
groups such as Group 1 and Group 2, you can see there are two options (1 or 2) within the HDD
group dropdown list.
Important:
Please make sure you have set the HDD group for each channel, otherwise you cannot save
current setup!
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-79
Figure 4-80
68
Advertisement
Table of Contents
