Table of Contents
Advertisement
corresponding record file trace in the time bar.
Playback
mode
and
4
channel
selection
pane.
channel option.
the / or the mouse to view the file. Select one item, and then double
click the mouse or click the ENTER button to initiate playback.
detect record.
File list
5
switch
button
lock. The file locked will not be overwritten.
channel setup interface.
Please note:
a 1/4 of the HDD's total space. The first 16G of each partition cannot be
locked.
stream. For the file that is writing or overwriting, it cannot be locked.
The card number search interface is shown as below.
Card
6
number
search
Playback
7
►/
control
pane.
© Copyright Qvis ®. All documentation rights reserved.
Playback mode：1/4/9/16. (It may vary due on different NVR models.)
In 1-window playback mode: you can select one out of the 16 channels.
In 4-window playback mode: you can select 4 channels according to
your requirement.
In 9-window playback mode, you can switch between 1-8 and 9-16
channels.
In 16-window playback mode, you can switch between1-16 and 17-32
channels.
The time bar will change once you modify the playback mode or the
Double click this button; you can view the picture/record file list of
current day.
The file list is to display the first channel of the record file.
The system can display a maximum of 128 files at any one time. Use
You can input the time period in the following interface to begin an
accurate search.
File type：R—regular record； A—external alarm record；M—Motion
Lock file. Click the file you want to lock and click the button
Search locked file: Click the button
Return: Click button
System locks up to 16 files. The size of the locked file shall be less than
System can only lock one file at one time and cannot lock the extra
Play/Pause
There are three ways for you to begin playback.
The play button
Double click the valid period of the time bar.
Double click the item in the file list.
to view the locked file.
, system goes back to the calendar and the
to
13
Advertisement
Table of Contents
