Qvis Iapollo SMART NVR User Manual page 49

The WIFI interface is shown as below (see Figure 4-41).

Auto connect WIFI: When you select this box, the system automatically connects to the
previous WIFI hotspot.

Refresh: You can click this to search the hotspot list again. It can automatically add the
information such as the password if you have set it beforehand.

Disconnect: Click this to turn off the connection.

Connect: Here you can click this to connect to the hotspot. System needs to turn off current
connection and then connect to a new hotspot, if there is a connection available that you can
select (see Figure 4-42).
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-41
Figure 4-42
42