Table of Contents
Advertisement
The system account adopts two levels of management: group and user. There are no limits to
group or user amount.
For the group or user management, there are two levels: admin and user.
The user name and group name can consist of up to 8-bytes. Only one name can be used
once. There are four default users: admin/888888/666666 and hidden user 'Default'. Except
user 6666, other users have administrator rights.
Hidden user 'Default' is for system interior use only and cannot be deleted. When there is no
login user, hidden user "default" automatically logs in. You can set some rights, such as being
able to monitor, for this user so that you can view some channels without login.
One user should belong to one group. User rights cannot exceed group right.
Reusable function: this function allows multiple users to use the same account to login.
After completing the setups please click save button, system goes back to the previous menu.
4.7.5.1
Modify Password
1. Click the password button, the interface is shown in Figure 4-89.
2. Here you can modify account password.
3. Please select the account from the dropdown list, input the old password and then input
the new password twice. Click the Save button to confirm current modification.
4. For the users with account permissions to edit the 'User account rights', they can modify
password of other users.
4.7.5.2 Add/Modify Group
Click add group button, the interface is shown below (see Figure 4-90).
Here you can input the group name and then input some memo information if necessary.
There are a total of 60 different rights such as: control panel, shut down, real-time monitor,
playback, record, record file backup, PTZ, user account, system information view, alarm
input/output setup, system setup, log view, clear log, upgrade system, control device, etc.
The modify group interface is similar to the Figure 4-90.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-89
74
Advertisement
Table of Contents
