Qvis Iapollo SMART NVR User Manual page 78

4.7.4.3 Enable/disable record
Please check current the channel status: "○" means it is not setup to record, "●" means it is
setup to record.
You can use mouse or direction key to highlight the channel number. See Figure 4-84.
4.7.4.4 Enable all channel recording
If you highlight the ○ below 'All', you can enable all channel recording.
Please highlight 'ALL' after "Schedule" (see Figure 4-85).
When system has scheduled recording setup, all channels will record as you have previously
set (Main menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-83
Figure 4-84
71