Qvis Iapollo SMART NVR User Manual page 59


Snapshot: You can enable this function to take a snapshot image when an alarm is
triggered.

Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm has been
triggered.
Please highlight icon
please click the save button, the system goes back to the previous menu.
For the 32-channel series product, the alarm interface and PTZ setup is shown below. See
Figure 4-57 and Figure 4-58.
© Copyright Qvis ®. All documentation rights reserved.
to select the corresponding function. After completing the setup,
Figure 4-57
Figure 4-58
52