Hdd Management - Qvis Iapollo SMART NVR User Manual

4.7.1 HDD Management

This is for you to view and implement hard disk management (see Figure 4-77)
.
You can view the current HDD type, status, capacity and record time. When HDD is working
properly, system is shown as 'O'. When HDD error occurred, system is shown as 'X'.

Alarm set: Click the alarm set button, the interface that appears is shown below (see Figure
4-78) (This interface is just like the abnormity setup). Please refer to chapter 4.7.2 for
detailed information.

HDD operation: You can select a HDD mode from the dropdown list, such as read-only or
you can erase all data in the HDD. Please note the system needs to reboot to get all the
modification activated.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-76
Figure 4-77
66