Temporarily Override Dialing Restrictions At A Phone; Using Directory; Using Last Number Redial (Lnr); Using And Entering Saved Number Dial - iPECS LIP-9010 User Manual

To deactivate Temporary COS:
 Press the TRANSFER(PGM),
 Dial 22 (User Program code),
 Dial your Authorization code,
 Press the HOLD(SAVE).
4.2.5

Temporarily override dialing restrictions at a phone

Override the dialing restrictions at any phone by activating Walking COS.
The Walking COS dialing restriction levels are applied for a single call only.
For multiple calls, you will need to reactivate Walking.
To activate Walking COS:
 Press the TRANSFER(PGM),
 Dial 23 (User Program code),
 Dial your Authorization Code (station number and password),
 Place call as normal.
4.3

Using Directory

4.3.1

Using Last Number Redial (LNR)

The last number dialed on an external call is automatically saved in the Last Number
Redial (LNR) buffer. The iPECS-UCP system will store the numbers dialed on the last
15 calls.
To dial the Last Number for an external call:
 Press the SPEED button,
 Dial *,
 Press the Navigation up and down buttons to select from the last 15
numbers dialed,
 Press the SEND Soft button or HOLD(SAVE).
4.3.2

Using and Entering Saved Number Dial

You may store the last number dialed on an external call to the Saved
Number Dial buffer for convenient dialing at a later time. The Saved
number is stored until a new number is saved.
36 LIP-9000 Series User Guide - ST