Disable Dialing From Your Phone; Temporarily Override Dialing Restrictions At A Phone; Directory; Using Last Number Redial (Lnr) - iPECS 1000i Series User Manual

1000i Series IP Phone (LME)
User Guide

4.2.4 Disable dialing from your phone

You can temporarily 'Lock' your phone by activating Temporary COS; the phone is not allowed to place outside
calling, except emergency calls. To deactivate Temporary COS you must enter your Authorization code.
To activate Temporary COS:
Press the MENU button.
1)
Dial Extension Class Down code 31.
2)
Dial your Password.
3)
Press the HOLD(SAVE) button.
4)
To deactivate Temporary COS:
Press the MENU button.
1)
Dial Extension Class Recover code 32.
2)
Dial your Password.
3)
Press the HOLD(SAVE) button.
4)

4.2.5 Temporarily override dialing restrictions at a phone

Override the dialing restrictions at any phone by activating Walking COS. When active, Walking COS applies
the Class of Service of your Authorization for a call. Note you must activate Walking COS for each call.
To activate Walking COS:
Press the MENU button.
1)
Dial User Program code 33.
2)
Dial your Authorization Code (station number and password).
3)
Place call as normal.
4)

Directory

4.3

4.3.1 Using Last Number Redial (LNR)

The last number dialed on an external call is automatically saved in the Last Number Redial (LNR) buffer.
To dial the Last Number for an external call:
Lift the handset.
1)
Dial Last Number Redial Code or Press REDIAL Softkey.
2)
Or,
Press the LOG Softkey.
1)
Press the Navigation up and down buttons to select from the last 100 numbers dialed or received.
2)
Press the SEND Softkey or HOLD(SAVE) button.
3)

4.3.2 Using and Entering Saved Number Dial

You may store the last number dialed on an external call to the Saved Number Dial buffer for convenient
dialing later.
The Saved number, which can be up to 24 digits, is stored until a new number is saved.
28
Issue 1.2