Disable Dialing From Your Phone; Temporarily Override Dialing Restrictions At A Phone; Using Directory; Using Last Number Redial (Lnr) - iPECS LIP-9000 Series User Manual

4.2.4 Disable dialing from your phone

You can temporarily 'Lock' your phone by activating Temporary COS; the
phone is not allowed to place outside calling, except emergency calls. To
deactivate Temporary COS you must enter your Authorization code.
To activate Temporary COS:
 Press the TRANSFER(PGM) button.
 Dial 21 (User Program code for UCP/eMG).
 Press the HOLD(SAVE) button.
To deactivate Temporary COS:
 Press the TRANSFER(PGM) button.
 Dial 22 (User Program code for UCP/eMG).
 Dial your Authorization code.
 Press the HOLD(SAVE) button.

4.2.5 Temporarily override dialing restrictions at a phone

Override the dialing restrictions at any phone by activating Walking COS.
When active, Walking COS applies the Class of Service of your
Authorization for a call. Note you must activate Walking COS for each call.
To activate Walking COS:
 Press the TRANSFER(PGM) button.
 Dial 23 (User Program code for UCP/eMG).
 Dial your Authorization Code (station number and password).
 Place call as normal.

4.3 Using Directory

4.3.1 Using Last Number Redial (LNR)

The last number dialed on an external call is automatically saved in the
Last Number Redial (LNR) buffer. The iPECS system will store the
numbers dialed at your station for the last 15 calls.
To dial the Last Number for an external call:
 Press the SPEED button.
LIP-9000 Series User Guide - ST- Issue 1. 5 29