Headset Volume; Default Handsfree Audio Path; Automatic Gain Control - Avaya 960 Series User Manual

9.1.1 Headset Volume

While talking via the headset, you can adjust the volume of the incoming call. The status indication line displays a
followed by eight bubbles that represent the volume level.
1. With the call connected on the headset, press the
+
2. Use the plus and
3. The display returns to normal after a few seconds.

9.1.2 Default Handsfree Audio Path

By default, when you make a call or answer a call without lifting the handset, the audio is played through the phone's
speaker while you speak via the phone's microphone.
If you have a headset attached, you can change the phone's behavior so that the audio is played through the headset by
default rather than the speaker.
1. Press the MENU/HOME button and select Settings.
2. Use the up and down
3. Use the up and down
4. Use the up and down
5. Press Change to change the setting between Headset and Speaker.
6. When completed, press the Save soft key.
7. Press the Back / Exit soft keys to exit the menus.

9.1.3 Automatic Gain Control

When using automatic gain control (AGC), the phone tries to maintain a constant audio level even if the incoming call
changes between loud and quiet.
1. Press the MENU/HOME button and select Settings.
2. Use the up and down
3. Use the up and down
· Use the up and down
· To change the highlighted setting, press Change.
4. When completed, press Save.
5. Press Back / Exit to exit the menus.
9600 Series User Guide
IP Office 9.0
–
minus keys to adjust the volume.
arrow keys to highlight Options & Settings. Press Select.
arrow keys to highlight Call Settings. Press Select.
arrow keys to highlight Audio Path.
arrow keys to highlight Advanced Options. Press Select.
arrow keys to highlight Automatic Gain Control. Press Select.
arrow keys to switch between Handset, Headset, or Speaker settings for AGC.
Headset/Handsfree Operation: Headset Operation
key.
icon
Page 57
Issue 08b (10 April 2014)