Adjust The Headset Volume; Change The Noise Mode; Mute/Unmute A Call; End A Call - Avaya 3641 User Manual

Adjust the Headset Volume

While the headset is plugged in, press the up/down volume buttons on the side of the
handset during the call.

Change the Noise Mode

When the background noise increases or decreases, you can adjust the sensitivity of the
microphone and speaker. The name of the mode describes the noise level in the
environment. Select
Severe
noise; or
quiet environment, the person on the other end of the line may find it difficult to hear your
voice.
From standby mode:
▬▬▬▬▬▬▬▬▬
Press the
1.
Press the
2.
press the
▬▬▬▬
Note:
High
If you use
the line may find it difficult to hear your voice.

Mute/Unmute a Call

Mute
Press the
to the audio receive-only icon
softkey again to restore audio pickup.

End a Call

End
Press the
standby mode.
Avaya 3641/3645 IP Wireless Handset SIP User Guide
Using the Basic Features of your Avaya 3641/3645 IP Wireless Handset
Normal
for most office environments;
for extremely noisy conditions. If you use
Nav ▲ or ▼ key to display the second set of softkeys.
Nois
softkey. Note the icon on the status bar. As you repeatedly
Nois
softkey, the icon cycles through the different modes.

= Normal

= High

= Severe
Severe
or modes in a quiet environment, the person on the other end of
softkey. When the handset is muted, the audio flowing icon
and
END
softkey or key on the keypad to end an active call and return to the
High
High
Muted
displays on the status bar. Press the
for moderate background
Severe
or modes in a
changes
Mute
June 2012 43