Quick Reference Comand; Switching The Comand Control Unit On And Off; Volume - Mercedes-Benz COMAND Operator's Manual

At a glance

Quick reference COMAND

Quick reference COMAND
i
You have the following options to
control the system:
at the COMAND
at the multifunction steering wheel
(refer to vehicle Operator's Manual)
This Operator's Manual describes the
control at the COMAND.
Unless otherwise indicated, the
descriptions and illustrations refer to
the COMAND.
34
Switching the COMAND control unit
on and off
Switching on
i
For an explanation of starter switch
positions, refer to vehicle Operator's
Manual.
Turn the key in the starter switch to
position 1 or 2 if the COMAND was
switched off by turning the key in the
starter switch to position 0 and
removing it.
or
Press e.
In both cases, the system will activate
the operating mode which was active
when the system was switched off.
i
If the key is not in the starter switch in
position 1 or 2, the system will automa-
tically stop after around 30 minutes.
Switching off
Turn the key in the starter switch to
position 0 and pull the key out.
or
Press e.

Volume

When the audio is playing, the volume
knob will adjust the audio volume, and also
the volume for telephone and navigation.
During a telephone call (talking or ringing),
the volume knob will adjust the telephone
voice and ringer volume.
The volume for the navigation announce-
ments can only be changed while an
announcement is being made.
When you adjust the volume, the system
will automatically store the setting for the
current operating mode.