Selecting Beeps - Mercedes-Benz Comand Operator's Manual

3.4 mi
Map
Stop
Mix
BATTERY PARK/STATE ST
P82.85-9316-31US
The route will be calculated. COMAND
identifies the road you are travelling on.
You will see the arrow indicating the direc-
tion of travel if COMAND recognizes the
road you are travelling on. You will e.g.
hear the message "Please turn right". Rou-
te guidance will begin.
You will find more information in chapter
"Navigation" ( page 123).
Day and night display, switching off
screen
Press Ä repeatedly until the desired
display appears.
The display changes in this order:
0.1 mi
Day display
Night display
Screen off
Day display
i
It is also possible to carry out the
change between day and night display
automatically via the light sensor
( page 198).
At a glance
Quick reference COMAND

Selecting beeps

You can switch different beeps on and off.
Acknowledgement beep
Beeps when you accept an entry or en-
ter a destination on the map
Info beep
Beeps when you see the messages an-
nouncing a drop of battery voltage
( page 10)
Alarm beep
Beeps if the device has a serious mal-
function or if you are listening to a di-
saster announcement on the radio. You
can only switch off the beep if you also
switch off COMAND.
You will find more information in chapter
"System settings" ( page 197).
21