Call Lists - Mercedes-Benz COMAND Operating Instructions Manual

Using call lists
138
If you select
canceled.
To select the number to be overwritten:
X
turn the controller and press to confirm.
An input menu appears. The data field for
entering the new phone number is
highlighted.
Enter characters and save the entry
X
( page 30).
Y
Storing the phone number as a speed
dial number
You can assign a speed dial to an existing
phone number.
To select an entry from the selection list:
X
turn the controller and press to confirm.
To select the desired telephone number:
X
turn the controller.
To select the list symbol to the right of the
X
entry: slide VY the controller and press to
confirm.
To select Speed Speed Dial
X
and press to confirm.
You can now store the number in one of the
ten speed dial presets (
Using call lists
Introduction
When making calls using COMAND, incoming
and outgoing calls (including missed calls) are
stored in separate lists. Call lists are not
available unless a mobile phone is connected
to COMAND.
COMAND supports the PBAP Bluetooth
profile. The system behavior differs as
follows:
®
Bluetooth telephone with PBAP
R
®
Bluetooth profile:
The call lists are downloaded automatically
from the mobile phone by COMAND as
No, the process will be No
Dial: turn the controller
page 141).
Y
soon as the mobile phone is connected to
COMAND.
®
Bluetooth
R
®
Bluetooth
The call lists are created, displayed and
stored by COMAND.
i
For Bluetooth
PBAP Bluetooth
COMAND are not synchronized with those
on your mobile phone. These calls may or
may not be listed on your mobile phone,
depending on the model.
i
If no mobile phone is connected, then the

Call Lists

Call Lists
cannot be selected. If you connect a mobile
phone other than the previous one to
COMAND the previously available call lists
will be deleted automatically. The call lists
are still available on the mobile phone itself.
i
If COMAND has not saved any call lists for
the phone connected: you cannot select
the respective menu items until calls have
been received or made.
Displaying missed calls in the COMAND
display is not supported by all mobile
phones.
Opening the call list and selecting an
entry
To call up the basic telephone menu: press
X
the % button one or more times.
To switch to the menu bar: slide VÆ the
X
controller.
To select Call Call Lists
X
controller.
®
A menu appears.
To select Entered Entered
X
controller and press to confirm.
The corresponding list appears.
telephone without PBAP
profile:
®
telephones without the
®
profile, the call lists in
menu item is grayed out and
Lists: turn and press the
or Selected: turn the Selected