Telephone Operation - Mercedes-Benz COMAND control panel Operating Instructions Manual

To reject: select Reject
X
the COMAND controller and press W to
confirm.
or
Press the ~ button on COMAND or on
X
the multifunction steering wheel.
To accept: confirm
X
W.
or
Press the 6 button on COMAND or on
X
the multifunction steering wheel.
Multifunction display (example)
i
You can also accept the call by voice
command using the Voice Control System
(see the separate operating instructions).
Once you have accepted the call, you can use
hands-free mode. The call volume can be
adjusted ( page 34). For more information,
Y
see the "Functions during a single call
connection" section (
The display shows the phone number or the
name and phone number (if the entry is stored
by turning cVd
Accept by pressing
page 122).
Y

Telephone operation

in the address book) or shows the
(phone number withheld) message.
i
You can also accept a call as described
above when another main function is
switched on in COMAND. Once you have
accepted the call, the display switches to
telephone mode. After the call is finished,
you see the display of the previous main
application again.
The display does not switch to telephone
mode if you:
hide the window with the % button
R
next to the COMAND controller and then
accept the call with the ; button on
R
the multifunction steering wheel
Making a call
Entering a telephone number using the
number keypad
Call up the telephone basic menu
X
( page 119).
Y
Enter the digits using the number keypad.
X
To connect a call: press the 6 button
X
on COMAND or on the multifunction
steering wheel.
Entering a telephone number using the
telephone basic menu
Call up the telephone basic menu
X
( page 119).
Y
Select the digits one by one by turning
X
cVd and sliding ZVÆ the COMAND
controller and press W to confirm.
To connect a call: select ° in the
X
character bar and press W to confirm.
or
Press the 6 button on COMAND or on
X
the multifunction steering wheel.
121
Unknown
Z