Last Number Redial - NEC Univerge SV8100 General Description Manual

UNIVERGE SV8100



Not supported with VM8000 InMail.


Last Number Redial

Enhancements
Improved Cursor Key operation (Version 3000 or higher software).
Last Number Redial allows an extension user to quickly redial the last number dialed.
For example, a user may quickly recall a busy or unanswered number without
manually dialing the digits.
Last Number Redial saves the last 24 digits a user dials in system memory. The
number can be any combination of digits 0~9,
digits regardless of whether the call was answered, unanswered or busy. The system
normally uses the same trunk group as for the initial call. However, the extension
user can preselect a specific trunk if desired.
When the Redial key is pressed, the display indicates REDIAL [
then press
number to be dialed. Pressing Redial repeatedly scrolls through the last 10 numbers
dialed.
Licensing
Enhancements
The NAPT feature requires a Version 3000 or higher system license in order to
be activated.
A CD-CP00-US (CPU) can be upgrade to a Version 3000 or higher system
software however, the NAPT feature will not function unless a Version 3000 or
higher system license is applied.
When upgrading to Version 3100 or higher, four IP Terminal Basic licenses are
provided. If a system with Version 3.01 or lower is upgraded to Version 3.10, the
system gains four IP Terminal licenses as soon as it is upgraded.
Licenses are used to activate certain features and applications for the UNIVERGE
SV8100. Refer to the UNIVERGE SV8100 Features and Specifications Manual for
more details.
General Description Manual
Uniform Numbering Plan – K-CCIS
Voice Call – K-CCIS
Voice Mail Integration – K-CCIS
to redial the number displayed, or enter a System Speed Dialing bin
#

and . The system remembers the
#

Issue 5.02
] / SYS. The user can
#
2 - 43