NEC Univerge SV8100 General Description Manual page 60

Issue 5.02
Caller ID
Enhancements
Pressing the Left Cursor Key twice (on equipped terminals) displays the Incoming
Call History (Version 3000 or higher software).
Caller ID allows a display terminal to show an incoming caller's telephone number
(called the Directory Number or DN) and optional name. The Caller ID information is
available as pre-answer display. With the pre-answer display, the user previews the
caller's number before picking up the ringing line.

Caller ID – Flexible Ringing
Enhancements
Flexible Ringing by Caller ID feature added with Version 3000 or higher.
The Caller ID – Flexible Ringing feature provides several different options for
rerouting calls based on the Caller ID received.
Central Office Calls, Answering
Enhancements
With Version 3000 or higher system software, the appropriate line key page
automatically displays for incoming calls on the DTL-8LD-1 (DESI-Less) and
ITL-320C-1 terminals.
The system provides flexible routing of incoming CO (trunks) calls to meet the exact
site requirements. This lets trunk calls ring and be answered at any combination of
system extensions. A maximum of 200 trunks are available.
Central Office Calls, Placing
The system provides flexibility in the way each extension user can place outgoing
trunk calls. This lets you customize the call placing options to meet site requirements
and individual needs. To place a call, a user can:


2 - 18
On the CD-CP00-US for Caller ID (also used for DTMF receivers and Call Progress Tone
Detection) 32 resources are available. The PZ-BS10 provides an additional 64 resources.
Press Line Keys
Press a Trunk Group Key
UNIVERGE SV8100
Features