Equipment And Applications Overview - NEC Univerge SV8100 General Description Manual

UNIVERGE SV8100
3.3
General Description Manual

Equipment and Applications Overview

The primary target of the UNIVERGE SV8100 system is the small to
medium-sized business. As such, it supports a number of robust applications
and additional equipment that add value to the system. These include:
Automatic Call Distribution (ACD)

Voice Mail

Computer Telephone Integration (CTI)

Unified Messaging

Wireless Handsets

Station Message Detail Recording (SMDR)

Single Line Telephones

External Speakerphones

Doorphones

External Speakers

Wireless DECT SIP

CO/PBX lines, Centrex lines, Direct Inward Dialing (DID), Tie lines, FT1

lines, ISDN-BRI and ISDN-PRI line
Communications between legacy stations/trunks and DT700 series
telephones/IP networks are made using a VoIP daughter board, which
converts packet-based voice data to TDM-based voice data, and vice versa.
Both peer-to-peer connections and TDM-based connections are controlled by
the CPU blade. The CPU incorporates a built-in Device Registration Server
(DRS) and a single interface point of IP connection to IP telephone, PCPro
and OAI / ACD servers.
and Base) Connectivity,
Connectivity on page 1-12
Base and Expansion) Connectivity on page 1-13
SV8100 system connectivity.
Figure 1-5 Simplified SV8100 System (9.5" Gateway
Figure 1-6 Simplified SV8100 System (19")
and Figure 1-7 Simplified SV8100 System (9.5"
Issue 5.02
are simplified views of the
1 - 11