NEC Univerge SV8100 General Description Manual page 111

UNIVERGE SV8100
SV8100 Internal Router
The SV8100 Internal Router converged network appliance is an intelligent, all-in-one
networking solution for enterprises and service providers. It reduces costs by
simplifying the deployment, management, and security of converged voice, video,
and data networks. The Internal Router provides the following important functions for
converged networks:







SV8100 NetLink
Enhancements
This feature added with Version 1100 (Version 1.12 or higher).
The NetLink feature allows up to 16 sites to be linked together over a Data
Communication IP NetLink that allows Remote Sites to have the same service
features as the main site acting as one system. Systems can be installed separately
in the same building or in remote offices connected via a qualified IP network.
With NetLink, the maximum system capacity still applies (200 Trunks and 512
Stations), but the ports can be distributed between sites using an SV8100 CHS2U-US
chassis at each location.
Each site requires a PZ-(X)IPLA daughter board and a PZ-ME50-US Memory
Expansion daughter board installed on its CD-CP00-US blade. The CD-CP00-US
blade at each Remote Site must have the same system data as the Main Site
CD-CP00-US blade. The Main Site automatically uploads the system data to Remote
Sites anytime the data is changed.
The main site requires a proper LK-SYS-NETLINKX-LIC license for each remote site.
When communication failure occurs between the Main Site and any Remote Site, The
Main Site CD-CP00-US blade automatically changes to survival mode and operates
as a stand-alone system. If multiple Remote Sites are installed, a Remote Site can be
assigned as a temporary Main Site to control remaining connected sites.
General Description Manual
T1 Wide Area Network (WAN) access router
Manual payload loop through the GUI
Security
VoIP
Quality of service
Call quality monitoring
Future-proof scalability
Issue 5.02
2 - 69