Pulse To Tone Conversion - NEC Univerge SV8100 General Description Manual

Issue 5.02

Pulse to Tone Conversion

An extension user can use Pulse to Tone Conversion on trunk calls. Pulse to Tone
Conversion lets a user change their extension dialing mode while placing a call. For
systems in a Dial Pulse area, this permits users to access dial-up Other Common
Carriers (OCCs) such as MCI from their DP area. The user can, for example:



Redial Function
Users can press Redial to cycle through the last 10 outside numbers dialed. Pressing
redials the number displayed. Users can also press Redial and dial a System Speed
#
Dial bin number to access System Speed Dial.
Remote (System) Upgrade
With PC Programming, the UNIVERGE SV8100 can be remotely upgraded to a
newer version of main system software. When a new version of main system software
is released, a firmware package file is provided. Using either the WebPro or PCPro
application, a technician can remotely upgrade the firmware on the CD-CP00-US.
The upgrade can be applied immediately, or at a scheduled date and time. Remote
Upgrade is supported only via a LAN connection. A modem or serial connection is
NOT supported for Remote Upgrade.
Repeat Redial
If a multiline terminal user places a trunk call that is busy or unanswered, they can
have Repeat Redial try it again later on. The user does not continually have to try the
number again – hoping it goes through. Repeat Redial automatically retries it until the
called party answers (the number of retries is based on system programming).
Resident System Program
When power is applied to the system, the hardware configuration is scanned and
Resident System Program default values are assigned including terminal types [e.g.,
PGD(2)-U10 ADP or DSS Console]. This enables immediate operation, even before
the system is programmed to accommodate the individual site requirements.
2 - 54
Place a call to an OCC over a DP trunk.
Depending on programming:
Manually implement Pulse to Tone Conversion.
- OR -
Wait 10 seconds.
Dial the OCC security code and desired number. The system dials the DTMF
digits after the conversion.
UNIVERGE SV8100
Features