BT Business Total Broadband User Manual page 56

resetting your BT Business Hub
WArnInG: resetting your Hub means you also have to reapply any changes
you've made to the Hub software. These changes may include:
• activating BT Business Broadband Voice – see page 28
• any wireless settings you may have changed
• your Hub password and any Hub Manager changes – see page 52
• port forwarding settings
To reset your Hub to its factory default settings, removing all personal settings:
use a pin or paperclip to press and hold the recessed
1
your Hub for 15 seconds until your Hub lights go out
stop pressing and wait for the Hub's Broadband light to glow green – this may
2
take several minutes
Alternatively, you may reset your Hub using your Hub Manager.
Open your web browser and type http://home or http://192.168.1.254 in the
1
address bar and press
Select the Settings
2
In the Reset to Factory Default
3
to enter your password – if you haven't changed it, the default password is the
same as the serial number on the side of your Hub.
Please note: BT Openzone will be enabled when you reset your Hub.
For more information on BT Openzone, see page 27.
Enter or your return key.
tab, then the Diagnostics
State, click the
Reset button on the back of
tab, followed by the
Reset button. You may be asked
Resets link.
Help
55