I'm Trying To Select The Subnet 10.X.x.x Ip Range And Have Received An; Error In My Hub Manager. What Can I Do - BT Business Total Broadband User Manual

To change your Hub Manager's password:
once your BT Business Total Broadband service is set up, access your Hub
1
Manager by typing http://home or http://192.168.1.254 in the address bar
of your web browser and pressing
click Settings at the top of the page, then
2
you'll be asked to enter the current password (your Hub's default password is its
3
serial number)
follow the on-screen instructions to set a new password
4

I'm trying to select the subnet 10.x.x.x IP range and have received an

Q

error in my Hub manager. What can I do?

Even if BT Openzone is disabled, the subnet 10.x.x.x IP range settings remain.
We therefore suggest you use an alternative IP range or follow the steps below to
obtain the subnet 10.x.x.x IP range:
unplug your broadband cable
1
reset your Hub. To find out how to do this, see page 55
2
WArnInG: resetting your Hub means you also have to reset any changes
you've made to the Hub software. To see what such changes may include,
see page 55.
access your Hub Manager by typing http://home or http://192.168.1.254 in
3
the address bar of your web browser and pressing
click Settings, then
4
change your LAN settings to use the subnet 10.x.x.x. IP range
5
plug in your Broadband cable
6
Enter
LAN and Private Network
or your return key
Password
Enter or your return key
Help
53