BT Business Total Broadband User Manual page 14

Connect computer using wireless without the CD
If your computer is already connected to your Hub using an Ethernet cable,
1
unplug this cable.
Place your computer close to the Hub for a good wireless signal.
2
If you haven't already, install your wireless adapter in your computer using
3
the adapter manufacturer's instructions. If you're using a laptop with built-in
wireless, turn wireless on by either using the wireless switch (if your computer
has one) or activating wireless from within your wireless software. Your wireless
adapter must be 802.11b or g compatible.
If you don't have a wireless adapter or your computer isn't wireless-enabled,
see page 47.
Find your Hub's preset wireless network name/SSID and Wi-Fi key (WPA2).
4
These are printed on your wireless settings card (found in your Hub's box) and
also on the side of your Hub.
BTBusinessHub-XX
XXXXXXXXXX
XXXXXXXXXXXX
Your wireless settings card
Follow the instructions for your computer's operating system below or, if
5
your wireless adapter has its own software, use this to set up your wireless
connection – its help function may be useful if you aren't sure how to do this.
S/N: 123456789012 SSID: BTBusinessHub-###
Wi-Fi Key: 1234567890
P/N: 4201-003004-000
Wireless settings label (on side of Hub)
2701HGV-C
FLX
Set-up
13