BT Business Total Broadband User Manual page 26

Enter the IP Address you wish to set the computer to (e.g. 217.37.237.65) and
2
the Subnet mask to 255.255.255.0, the Gateway to
DNS Server to 217.37.237.78.
Renew the IP address of the computer as shown below. Your Hub automatically
3
detects the Static IP and removes the IP address from the public Static IP
DHCP pool.
Set your Hub to always provide the same Static IP address
Keep the computer in DHCP mode (i.e. obtain an IP address automatically).
1
Open your web browser, type http://home (for your Hub Manager) in the
2
address bar and press
Select Settings, then LAN, followed by
3
For the required device, select
4
Assignment and Public Fixed: 217.37.237.73
Click Save before you close the window. You may be asked to enter your
5
password – if you haven't changed it, the default password is the same as the
serial number on the side of your Hub.
Set your Hub to provide any available Static IP address
Keep the computer in DHCP mode (i.e. obtain an IP address automatically).
1
Open your web browser, type http://home (for your Hub Manager) in the
2
address bar and press
Select Settings, then LAN, followed by
3
For the required device, select
4
Assignment and Public from pool: 217.37.237.72
Click Save before you close the window. You may be asked to enter your
5
password – if you haven't changed it, the default password is the same as the
serial number on the side of your Hub.
Enter or your return key.
NAT & Address
Public (select WAN IP Mapping)
Enter or your return key.
NAT & Address
Public (select WAN IP Mapping)
217.37.237.78
Allocation.
for Address
for WAN IP Mapping.
Allocation.
for Address
for WAN IP Mapping.
Extra features
and the
25