BT Business Total Broadband User Manual page 16

Connect computer using the Ethernet cable without the CD
Check that your computer has a spare Ethernet port. This is a small socket on the
1
back or side of your computer and is usually marked LAN, Ethernet,
or . If you aren't sure, check your computer documentation.
Plug one end of the yellow Ethernet cable into one of your Hub's Ethernet sockets.
2
Plug the other end of the Ethernet cable into your computer's Ethernet socket.
3
Open your web browser – you should be on the internet. If you can't connect to
4
the internet, please restart your computer and try the 'Connect computer using
the Ethernet cable without the CD' again.
> If you still can't connect, please check that your computer's IP settings are
correct (see page 24) or run the CD
> If a dial-up window appears, see page 52
Congratulations – you're now connected to BT Business Total Broadband using
5
your BT Business Hub. To continue set-up and explore your broadband service's
great features, go to www.bt.com/business/activate
To connect extra computers, go to step 8 on page 16.
Set-up
15