Replacing The Staple Case In The Stapler Unit - Canon imageRunner 400 Reference Manual

Replacing the Staple Case in the Stapler Unit

Finisher-C1/Saddle Finisher-C2
When the Finisher runs out of staples, the staple case must be replaced.
The message on the left will appear in the touch panel display. Follow the
procedure described below to replace the staple case.
1
Open the front cover (upper) of the Finisher.
2
Push down the green lever.
3
Pull out the slightly protruding staple
cartridge holding it by its left and right
sides.
7–21