Setting The Initial Screen For The Printer Functions - Canon imageRunner 400 Reference Manual

Setting the Initial Screen for the Printer Functions

Set whether to display the Mail Box selection screen, or the printer function interface screen, when you
press the key.
PRINT•I/F
NOTICE
This setting is not necessary if the printer functions are not installed.
This setting is not necessary if the optional expansion memory (32 MB, 64 MB) is not installed with the
imageRUNNER 400S/330S, even if the printer functions are installed.
MEMO
The initial setting is "MAIL BOX".
1 1
Call up the desired screen as follows:
Additional Functions
Key
Custom Settings for Copying, FAX and Printing
2
Enter the System settings password, then
press the [OK] key.
MEMO
Enter the password stored under Set System Settings
Password. (See "Setting or Changing the System
Settings Password," on p. 4-16.)
This step is not required if the system settings password
is not stored.
3
Select the [ON] or [OFF] key, then press
the [OK] key.
Fax function cannot be used without control card.
Fax function can be used without control card.
4
Press the [DONE] key.
Repeat this until the Basic Features screen appears
again.
2
Select the [MAIL BOX] or [OTHER] key, then
press the [OK] key.
3
Press the [DONE] key.
Repeat this until the Basic Features screen appears again.
4–17