Placing An Original On The Platen Glass - Canon imageRunner 400 Reference Manual

Placing Originals

Placing an Original on the Platen Glass

You should use the platen glass when copying books, originals on heavy or thin paper, and transparen-
cies, etc.
1–12
1
Lift up the feeder or platen cover.
2
Place your original.
The surface that you want to copy must be placed face down.
Align the corner of the original with the mark at the top left corner
of the platen glass.
MEMO
Place books and other bound originals on the platen
glass in the same way.
When enlarging LTR/STMT-size originals to 11" × 17"-
size paper, place the original horizontally on the platen
glass and align it with the LTRR or STMTR marks.
3
Gently lower the feeder or platen cover.
NOTICE
When placing originals on the platen glass, the size
of the original is detected after the feeder or platen
cover has been lowered. Be sure to lower the
feeder or platen cover before copying.
CAUTION
Close the feeder (or platen glass) gently to avoid
catching your hand, as this may result in personal
injury.
Do not press down hard on the platen cover (or
feeder) when using the platen glass to copy thick
books. This may damage the platen glass.