Canon imageRunner 400 Reference Manual page 82

Collating Copies (FINISHER)
2–40
1
Place your originals in the feeder and press the
[FINISHER] key.
2
Press the desired collate feature, and press the
[OK] key.
MEMO
[STAPLE] is only displayed when the optional Finisher-
C1, Saddle Finisher-C2 or Finisher-E1 is installed.
When [STAPLE] is selected, select the stapling
position and press the [OK] key.
NOTICE
Double-stapling cannot be performed when the
Finisher-E1 is installed.
STMT, STMTR paper cannot be corner-stapled.
LTRR, STMT, STMTR paper cannot be double-stapled.
The display returns to the Basic Features screen and the
selected setting is displayed above [FINISHER].
3
Proceed to make copies in the usual way.
MEMO
To cancel the settings, press the [FINISHER] and
[C] keys in that order.
You can also cancel the mode by pressing the
mode.)
Reset
key. (The machine returns to the Standard