Table of Contents
Advertisement
Making Copies For Use as a Booklet
5
Press the [DONE] key.
The display returns to the Basic Features Screen.
6
Proceed to make copies in the usual way.
For the next two facing pages, place the original and press the
Copy of Original on Platen Glass," on p. 2-29.)
3–12
4
Select the paper size and press the [OK] key.
NOTICE
MEMO
To copy on the cover page, select the [YES] key,
otherwise select the [NO] key, and then press the [OK]
key.
The display returns to the Special Features screen.
When Saddle Finisher- C2 is installed
Select the saddle stitch setting and press the [OK] key.
The display reverts to the Special Features screen.
NOTICE
MEMO
MEMO
To cancel the setting, press the [SPECIAL FEATURES] , [BOOKLET] and [C] keys in
that order.
You can also cancel the mode by pressing the
(The machine returns to the standard mode.)
The paper used for the cover page must be the same size
as the other pages.
The paper used for the cover page must not be heavier than
32-lb bond (128 g/m
2
).
11"x17" and LTRR-size paper can be used.
To add a cover page, press the [ADD COVER] key.
Insert the paper for the cover page in the stack bypass tray.
The cover page can only be copied on the front.
The saddle stitch setting is available only when the Saddle
Finisher-C2 is installed.
The maximum number of sheets that can be saddle stitched
is 15.
Reset
key.
Start
key again.(See "Memory
Hide quick links:
Advertisement
Table of Contents
