Slightly Reducing Images To Prevent The Original Periphery From Being Cut (Entire Image) - Canon imageRunner 400 Reference Manual

Slightly Reducing Images to Prevent the Original Periphery from Being Cut
(ENTIRE IMAGE)
When copying an original onto the same size of paper at a 100% copy ratio, the periphery of the original
may be cut slightly on the copy.
However, if you set the Entire Image mode, the copied image is automatically reduced slightly based on
the copy paper size and copy image size. As a result, the entire original image is reproduced on the
copy without its periphery being cut off.
Changing the Copy Ratio (Enlarging/Reducing Originals)
1
Place your original and press the [ZOOM] key.
2
Press the [ENTIRE IMAGE] key, then press the
[DONE] key.
The display returns to the Basic Features screen.
3
Proceed to make copies in the usual way.
MEMO
You can also cancel the mode by pressing the
key. (The machine returns to the Standard mode.)
Reset
2–13