Loading Paper For The First Time - Canon imageRunner 400 Reference Manual

Loading Paper

Loading Paper for the First Time

When loading paper for the first time, you must attach seals on the paper size dial and size plate of the paper
drawer, and set the size switch to the required paper series setting. Carry this out before loading paper.
MEMO
About Paper Size Series
The most often used paper sizes in America are the inch-series paper sizes 11"x17", LGL, LTR and STMT.
A3, A4 (A/B-series) paper sizes are used more frequently in Europe and Japan.
This machine is applicable for both different type of papers to meet your requirement.
Paper size dial
Dial seal
5–4
1
Grip the handle on the front of the paper drawer in
which you want to load paper. Pull out the paper
drawer until it stops.
2
Attach the seal (supplied) to the paper size dial.
Attach the seal aligning the position of the protrusion on the paper
size dial with the notch on the dial seal.
If you are using inch-series paper :
Attach the dial seal for inch-series paper.
If you are using A/B-series paper :
Attach the dial seal for A/B-series paper.
3
Attach the seal to the size plate.
Slide the size plate to the right while pushing down with the
tip of your finger.