Table of Contents
Advertisement
3
Select the margin type and press the [OK] key.
NOTICE
If you are using the Margin and Two-sided modes together
and copying an original that already has a margin, follow the
instructions below:
• 1
2 sided : Set the margin for the back only.
• 2
2 sided : You do not need to set the margin. Proceed to
make copies in the usual way.
• 2
1 sided : Set the margin for the back only.
If you are using the Margin and Two-sided modes together
and copying an original that does not have a margin, follow
the instructions below:
• 1
2 sided : Set the margin for both the front and back.
• 2
2 sided : Set the margin for both the front and back.
• 2
1 sided : Set the margin.
When the [LEFT MARGIN] or [RIGHT MARGIN] key is
selected
Use [+] and [–] to set the margin for the front and back (0" to 3/4").
Then press the [OK] key.
If you want to make the input in millimeters.
When the [TOP MARGIN] or [BOTTOM MARGIN] key
is selected
Use the numeric keypad or [+] and [-] to set the margin (1/16" to 3/4").
Then press the [OK] key.
4
Press the [DONE] key.
The display returns to the Basic Features screen.
5
Proceed to make copies in the usual way.
MEMO
You can cancel settings by pressing the [SPECIAL
FEATURES], [MARGIN], and [C] keys in that order.
You can also cancel the mode by pressing the
key. (The machine returns to the Standard mode.)
Making Copies with Margins
Reset
3–15
Hide quick links:
Advertisement
Table of Contents
