Memory Copy Of Original On Platen Glass - Canon imageRunner 400 Reference Manual

Memory Copy of Original on Platen Glass

If two-sided copying of an original on the platen glass is selected, the original is first scanned into
memory and then copied.
MEMO
Depending on the memory size of the machine, number of originals (LTR size Canon standard chart no.1)
scanned, differs as follows.
memory size
32MB
64MB
96MB
number of originals
150 originals
360 originals
650 originals
1
Place your original on the platen glass.
2
Set the copy mode and press the
Original scanning starts. To copy several originals, place the next
original and press the
MEMO
During scanning, the image quality setting can be
changed.
Adjusting exposure during scanning produces a
different result from adjusting exposure after copying
has started.
To stop the process, press the [CANCEL] key on the
touch-panel or press the
3
Press the [DONE] key.
The display reverts to the Basic Features screen and
copying starts.
NOTICE
MEMO
Using the Memory for Copying
Start
key again.
Stop
key on the control panel.
Originals of differing sizes cannot be scanned in
continuously.
During copying, the copy exposure can be
changed. (See "Changing the Exposure During
Copying," on p. 2-24.)
Adjusting the exposure after scanning the original
before and copying, will produce a different result
to adjusting the exposure during direct copying
(no scanning).
Start
key.
2–29