Table of Contents
Advertisement
Custom Settings for Copying, FAX and Printing
4
Press the [ ] and [ ] keys to display the depart-
ment to which the Dept. ID is to be stored, and
touch that position. Then enter the Dept. ID using
the Number keys (
MEMO
Up to 300 departments can be input, each identified by a
four-digit number.
5
If a password is needed, touch the position
corresponding to the dept. and enter the pass-
word with the Number keys (
MEMO
If you do not store a password, both the copy and FAX
function can be used by just entering the Dept. ID.
6
Press the [OK] key.
7
Press the [DONE] key.
Repeat this until the Basic Features screen appears
again.
-
).
9
0
0
MEMO
When Dept. ID Management is set, the
display below (Dept. ID/Password entry
screen) appears in the touch panel display
when you turn the power ON.
-
).
9
Press the
[OK] key.
4–19
Hide quick links:
Advertisement
Table of Contents
