Select a safe power supply.
Provide adequate installation space.
more than 4" (100mm)
51" (1296mm)
more than 4" (100mm)
75"-1/4 (1912mm)
more than 4" (100mm)
59"-3/8 (1507.4mm)
Moving the machine
Plug the machine into a 120V AC outlet.
Do not plug other electrical equipment into the outlet to
which the machine is connected.
Do not plug the machine into a multi-plug power strip.
Doing so might cause a fire.
The power cable may become damaged if it is often
stepped on or heavy objects are placed on it. Continued
use of a damaged power cable can lead to an accident.
Provide enough space on each side of the machine for
unrestricted operation.
Main Unit only
When installing the Finisher-C1 or the Saddle Finisher-C2
When installing the Finisher-E1
If you intend to move the machine, contact your service
representative beforehand.
Installation Precautions
23