Staple Realignment For Saddle Finisher - Canon imageRunner 400 Reference Manual

Staple Realignment for Saddle Finisher

After a staple jam in the Saddle Finisher unit has been cleared or staples are loaded in the Saddle
Finisher, this function feeds paper to the unit and staples a few times, so that staples will be immedi-
ately available for the next job.
NOTICE
This setting is not required when the Saddle Finisher-C2 is not installed.
MEMO
The required paper is fed automatically.
The following paper sizes can be used for this function: 11"x17"/LTRR.
1 1
Call up the desired screen as follows:
Additional Functions
Key
2
Press the [LIGHT] or [DARK] keys to adjust the
exposure, then press the [OK] key.
3
Press the [DONE] key.
Repeat this until the Basic Features screen appears again.
2
Press the [START] key.
3
When the function is completed, press the
[C] key.
4
Press the [DONE] key.
Repeat this until the Basic Features screen appears
again.
Zoom Fine Adjustment
4–29