Canon imageRunner 400 Reference Manual page 144

Deleting Copy Totals
The following instructions describe how to delete the copy totals made so far for all departments.
1 1
Call up the desired screen as follows:
Additional Functions
Key
Custom Settings for Copying, FAX and Printing
2
Enter the system settings password, then press
the [OK] key.
MEMO
Enter the password stored under Set System Settings
Password. (See "Setting or Charging the System
Settings Password," on p. 4-16.)
This step is not required if the system settings
password is not stored.
3
Select the [ON] key, then press the [COPY
TOTALS] key.
4
Press the [CLEAR ALL TOTALS] key.
5
Select the [YES] key.
The message "Initialized." is dis-
played in the touch panel display
for about two seconds.
MEMO
To cancel the deletion process, select
the [NO] key.
4–23