Miscellaneous Line Key Settings - Cisco 8851 Administration Manual

Cisco IP Phone Web Page

Miscellaneous Line Key Settings

Parameter
Line ID Mapping
SCA Barge-In Enable
SCA Sticky Auto Line Seize
Call Appearances Per Line
Supplementary Services
Parameter
Conference Serv
Attn Transfer Serv
Blind Transfer Serv
DND Serv
Block ANC Serv
Block CID Serv
Secure Call Serv
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
246
Description
Specifies the shared call appearance line ID mapping. If Vertical First
is set, the second call makes the next available line ID LED flash. If
Horizontal first is set, the second call will make the same LED flash on
which the first call is received. Also, the behavior is same for both
outgoing and incoming calls.
Default: Horizontal First
Enables the SCA Barge-In.
Default: No
If enabled, restricts to automatically pick up an incoming call on a shared
line when you take the phone off-hook.
This parameter allows you to choose the number of calls per line button.
You can choose a value from 2 to 10.
Default: 2
Description
Enable or disable three-way conference service.
Default: Yes
Enable or disable attended-call-transfer service.
Default: Yes
Enable or disable blind-call-transfer service.
Default: Yes
Enable or disable do not disturb service.
Default: Yes
Enable or disable block-anonymous-call service.
Default: Yes
Enable or disable blocking outbound Caller-ID service.
Default: Yes
Enable or disable secured call services.
Default: Yes