Chapter 2: Prerequisites
U
F
U
F
U
F
U
F
M
M
U
U
8
Chapter 2: Prerequisites
Drain Requirements
The 5lassware Washer drain hose connects to a fitting on
the rear side of the pumpbmotor assembly. The drain hose
is installed at the factory prior to shipment. The hose
provides a flexible coupling to the building drain piping
and can be secured with a spring or band hose clamp. PA
band hose clamp is provided with the washer.Q
Tubing or pipe, f" P1.3 cmQ ID or larger, should be
provided for the building drain. The use of an air gap is
strongly recommended to prevent siphoning of wastewater
into the washer.
DO NOT REDUCE THE SIgE OF THE
☞
DRAIN PLUMBIN5.
Mobile models drain into a sink through a hose assembly
that attaches to the faucet.
Space Requirements
If your 5lassware Washer is an Undercounter model, you
must ensure the undercounter opening is the proper size to
accommodate the washer. The dimensions for the
Undercounter washer are shown below in Figure 2-2.
P#o%&ct Se#+ice -./00.122.341/