Disconnecting The Hose-End Coupling - Labconco 44000 Series User Manual

18. Press the Select Program button.
19. The display window should read: HEAT i HI5H
TpSTAT and the heater activates.
20. Press the Select Program button.
21. The display window should read: HEAT i LOW
TpSTAT and the heater activates.
22. Press the Select Program button.
23. The display window should read: BLOWER ON. The
washer blower should be heard.
24. Press the Select Program button.
25. The display window should read: DONE. Open the
door latch to turn off the electronics, or select a wash
cycle and use the washer.
Disconnecting the Hose-End
Coupling
If you purchased a Mobile 5lassware Washer, you can
choose to disconnect the hose-end coupling from the hot
water faucet after the diagnostics procedure is completed.
Refer to Figure 3-18 and the instructions below to
disconnect the hose-end coupling.
P#o%&ct Se#+ice -./00.122.341/
Chapter 3: Getting Started
M
M
35