Testing Your Washer - Labconco 44000 Series User Manual

Chapter 3: Getting Started
Electrical junction
box cover
Electrical
junction box
32
Chapter 2: Prerequisites
BEFORE TURNIN5 ON THE WASHER,
☞
MAhE CERTAIN THE WATER IS
TURNED ON AND NO PAChIN5
MATERIAL REMAINS INSIDE THE
WASHER.

Testing Your Washer

Now that you have made the required water and electrical
connections to your washer, you need to test the operation
of the washer. A series of diagnostic steps are provided in
this section.
If the washer is interrupted in the middle
!
of the diagnostic steps, wait 4 to 5
seconds before opening the washer door
to prevent hot water from splashing out.
The hot water and steam from the
washer may cause scalding.
Figure 3-16
P#o%&ct Se#+ice -./00.122.341/