Installing The Casters Or Leveling Feet - Labconco 44000 Series User Manual

Chapter 3: Getting Started
M
M
Bottom of
washer
16
Chapter 2: Prerequisites
model, then you must level the washer and center the
washer door. If you have an Undercounter model, you
must also attach the washer to the countertop or
worksurface.
Installing the Casters or Leveling
Feet
If you have the Mobile model, the washer must rest on a
level floor. Refer to Figure 3-1 and follow the steps below
to install the casters on your washer.
To install the casters:
1. Locate the holes on the bottom of the washer where
the four skid-fastening screws were previously
attached.
2. Thread the four casters into these holes until the
casters fit tightly.
3. Carefully move the washer into an upright position.
Be careful to distribute the weight evenly on the
casters when setting the washer upright.
Figure 3-1
P#o%&ct Se#+ice -./00.122.341/