Selecting An Operating Cycle; Programming And Starting A Wash Cycle - Labconco 44000 Series User Manual

Selecting an Operating Cycle

The microprocessor control on your 5lassware Washer
allows you to select one of four factory preset wash cycles,
to custom program two additional cycles, or to run a rinse-
only cycle. The control panel is shown in Figure 4-7.
Press to
Press
start wash
Press to
to
cycle.
activate
select
the
Press to
wash
function.
rinse with
cycle.
pure water.
Programming and Starting a
Wash Cycle
Refer to Appendix C: Glassware Washer Specifications for
complete details on the various factory-set programs and
the options available for customizing cycles. After you
have decided which washer cycle you need to use, follow
the instructions below tostart your washer.
P#o%&ct Se#+ice -./00.122.341/
Press to Press to
display change
the details the
steam about the length of
selected Wash 2
wash cycle. cycle.
Chapter 4: Using Your Washer
Figure 4-7
Press to Press to
change change
the the
number drying
of time.
rinses.
47