Replacing The Washer Light Bulb - Labconco 44000 Series User Manual

Chapter 5: Maintaining Your Washer
Washer screw
Press in new bulb
and rotate clockwise.
Washer screws
56
Chapter 2: Prerequisites
Replacing the Washer Light
Bulb
If your 5lassware Washer is equipped with a window, you
will need to periodically replace the 25-watt washer light
bulb. Refer to Figure 5-3 and follow the instructions
below to replace the washer light bulb.
To replace the washer light bulb:
1. Turn off electrical power to the 5lassware Washer.
2. Remove the outer door panel by removing the two
screws located on each side of the washer, identified in
Figure 5-3.
3. Remove the bulb by pressing in on the bulb and
rotating the bulb counterclockwise.
4. Insert the new bulb and rotate clockwise into place, as
shown in Figure 5-3.
5. Replace the outer door panel.
Figure 5-3
P#o%&ct Se#+ice -./00.122.341/